🌊 Marine-Grade Corrosion Protection
专为海事、沿海及高湿环境设计，帮助抵御盐分、潮湿及腐蚀
Designed for marine, coastal and high-moisture environments to protect against salt, moisture and corrosion.
💧 Long-Lasting & Wash-Off Resistant
形成持久保护层，不易被水冲刷，适合长期暴露于盐水及户外环境的设备
Forms a long-lasting protective barrier that resists wash-off in saltwater and exposed outdoor environments.
⚙️ Penetrates, Lubricates & Protects
深入狭小间隙并润滑活动部件，减少磨损并帮助松动紧涩或锈蚀部件
Penetrates tight spaces, lubricates moving parts, reduces wear and helps free stiff or rusted components.
🔩 Anti-Seize & Galling Protection
可作为喷涂式防卡剂使用，并帮助防止不同金属接触时产生咬合
Works as a spray-on anti-seize and helps prevent galling between dissimilar metals.
⚡ Electrical Protection up to 70kV
干燥后可用于电气设备，耐压高达 70kV，适用于接线、连接器及电池端子
Safe for electrical equipment once dry and non-conductive up to 70kV, suitable for wiring, connectors and battery terminals.
♻️ Safe Across Multiple Materials
适用于金属、橡胶、塑料、乙烯基及皮革，满足多种海事设备维护需求
Suitable for metals, rubber, plastics, vinyl and leather across a wide range of marine maintenance applications.
1️⃣ 使用前请摇匀或搅拌
Shake well before use (or stir if needed).
2️⃣ 喷洒／刷涂于干净干燥表面
Apply on clean, dry surfaces using spray, brush, roller or wool pad.
3️⃣ 静置约 1 小时让溶剂挥发，形成保护膜
Allow 1 hour for carrier to evaporate and protective film to form.
4️⃣ 使用期间避免火源、高压与高温
Avoid flame, high voltage, or heat during drying process.
5️⃣ 可直接用于有轻油层的表面，无需完全清除油污
Compatible with lightly oiled surfaces – no need to remove all oil.
Q：MGX 与一般润滑剂有什么不同？
How is MGX different from a general-purpose lubricant?
A：MGX 专为海事、沿海及严苛户外环境设计，可同时提供润滑、防腐及耐冲洗保护，特别适合长期暴露于盐分和潮湿环境的设备。
MGX is specifically designed for marine, coastal and harsh outdoor environments, combining lubrication, corrosion protection and wash-off resistance for equipment regularly exposed to salt and moisture.
Q：MGX 适用于哪些海事设备？
What marine equipment can MGX be used on?
A：适用于舷外机及舷内机部件、转向缆线、支架、铰链、链条、钢丝绳、连接件、卸扣、绞盘、拖车、电气连接器及电池端子等。
Suitable for outboard and inboard components, steering cables, brackets, hinges, chains, wire ropes, linkages, shackles, winches, trailers, electrical connectors and battery terminals.
Q：MGX 可以用于不同金属之间的连接部位吗？
Can MGX be used between dissimilar metals?
A：可以。MGX 可帮助防止不同金属接触时产生咬合（galling），并可作为喷涂式防卡剂用于螺母、螺栓及其他金属连接部位。
Yes. MGX helps prevent galling between dissimilar metals and can be used as a spray-on anti-seize for nuts, bolts and other metal connections.
Q：MGX 可以用于电气设备吗？
Can MGX be used on electrical equipment?
A：可以。MGX 干燥后可用于电气设备，产品耐压高达 70kV，可用于接线、连接器、电气柜及电池端子的防潮和防腐保护。
Yes. MGX is suitable for electrical equipment once dry and is non-conductive up to 70kV. It can be used to protect wiring, connectors, electrical cabinets and battery terminals against moisture and corrosion.
Q：MGX 多久需要重新涂抹一次？
How often should MGX be reapplied?
A：重新涂抹周期取决于盐水、水分暴露频率、设备使用强度及维护条件。建议将表面状态检查纳入日常维护，并在保护层受损或经历频繁冲洗及严苛使用后重新涂抹。
Reapplication depends on salt and water exposure, operating intensity and maintenance conditions. Inspect treated surfaces during routine maintenance and reapply when protection has been compromised or after frequent washdown or demanding use.
MGX combines penetrating action, lubrication, anti-seize performance and corrosion protection in one marine-grade formulation. Developed for equipment exposed to salt, moisture and outdoor conditions, it helps keep moving components operating smoothly while protecting metal against corrosion and seizure.
MGX penetrates into joints, threads and difficult areas before leaving behind a pliable, water-repellent lanolin film. The protective layer resists wash-off and remains flexible, allowing it to migrate across minor scratches and help restore coverage instead of drying, cracking or peeling.
The lasting protective film is predominantly derived from renewable and biodegradable lanolin rather than an entirely petroleum-derived residual coating. Supported by Global GreenTag Platinum PHD certification, MGX helps extend equipment life while reducing repeated maintenance and premature component replacement.
加載中
